KWC GASTRO 2-handle 2-hole commercial kitchen tap with gastro spring, spray hose, stopcock and A 300 K.24.42.64 spout: parts for older version
This is the older version of the KWC GASTRO 2-handle 2-hole commercial kitchen tap with gastro spring, spray hose, stopcock and A 300 K.24.42.64 spout.
You can identify it by the 2011 spray hose (Z.536.530.145) with sealing screw Z.536.525.145 and washer Z.536.527, and by the K.30.99.33.000.44 standpipe connections with rosette Z.606.868.000.
In the second photo you can see the KWC parts diagram, with the KWC part number next to each part.
Below, under Buy individual parts, you will find the same numbers.
- Valid for: K.24.42.64.000C71, older version with 2011 spray hose
- Handles and top parts: cold water handle Z.503.009.000 (blue) and hot water handle Z.503.008.000 (red), each on an M20x1.25 K.32.40.01.931 top part (price per piece: you need 2 for both hot and cold)
- Gastro spring: Z.534.714.700 support spring with L1075 stainless steel spray hose Z.502.844.700 (also available in L1275 Z.502.868.700 and L1500 Z.502.869.700) and Z.633.570 spring sleeve
- Spray hose (pre-rinse hose): 2011 version Z.536.530.145, graphite grey, with filter Z.601.434, sealing screw Z.536.525.145, push pin Z.536.526, spray plate Z.636.518 and washer Z.536.527
- Spout: A 300 Z.535.424.000 swivel spout (rotatable 180°) with M22x1 K.31.99.00.000.30 flow regulator and Z.200.176 sliding ring/O-ring set
- Standpipe: L500, ø20.5 mm Z.503.836.000 with Z.601.205 O-ring
- Wall-mounted spray holder: Z.506.019.000; M12 L60 extension (Z.500.897.000) and L90 extension (Z.505.221.000)
- Ring at the spray holder: this diagram still shows washer Z.634.116; this is no longer available, the successor is Z.638.391 (see the sheet of the current version)
- Tap body: CV16/DN15 Z.530.534 non-return valve and M6x0.75 Z.600.025.700 mounting screw
- Stopcock: D31 Z.634.783.000 handle with 1/2" Z.501.297 ceramic cartridge and Z.631.222 locking sleeve
- Standpipe connections: on this diagram K.30.99.33.000.44 (no longer available; now K.30.99.34.000.44, see the sheet of the current version), with Z.600.276 flat washer, Z.606.868.000 rosette and Z.532.649.901 1/2" mounting set
Does your tap have the 2024 spray hose (Z.539.030.145)? Then you have the current version. At the top you can also switch between the versions.
Not sure which version you have? Send us a photo, we will find out for you!
