KWC GASTRO 2-handle 2-hole commercial kitchen tap with gastro spring, dishwashing spray and intermediate tap K.24.42.61 / 63: parts
Are you looking for a part for your KWC GASTRO 2-handle 2-hole commercial kitchen tap with gastro spring, dishwashing spray (pre-rinse spray) and intermediate tap with a 180 mm spout (K.24.42.61) or 300 mm spout (K.24.42.63)?
The second photo shows the current KWC parts drawing, with the KWC part number next to each part.
You will find the same numbers below under Buy individual parts.
- Valid for: K.24.42.61.000C71 and K.24.42.63.000C71, chrome, center-to-center 153 mm, current 2024 version with dishwashing spray
- Handles and top parts: cold water handle Z.503.009.000 (blue) and hot water handle Z.503.008.000 (red), each on a M20x1.25 top part K.32.40.01.931; the intermediate tap also has a K.32.40.01.931 top part with handle Z.503.008.000 (price per piece: this tap has 3 top parts)
- Gastro spring: Z.534.714.700 spring with stainless steel shower hose L1075 Z.502.844.700 (also available in L1275 Z.502.868.700 and L1500 Z.502.869.700) and spring sleeve Z.633.570
- Dishwashing spray (pre-rinse spray): 2024 version Z.539.030.145, graphite grey, with filter Z.601.434, sealing screw Z.538.997, push pin Z.536.526, O-ring Z.635.172, spray plate Z.636.518 and washer Z.538.996
- Riser with intermediate tap: Z.503.091.000 (ø20.5 mm, L728) with mounting screw Z.600.025.700, sliding ring/O-ring set Z.200.176 and O-ring Z.600.529; intermediate tap A 180 spout K.33.42.62.000 with 1/2" aerator Z.534.917.000; for K.24.42.63, A 300 spout K.33.42.04.000 with M22x1 aerator K.31.90.00.000A30
- Wall-mounted shower holder: Z.506.019.000 with support ring Z.538.106; extensions M12 L60 (Z.500.897.000) and L90 (Z.505.221.000)
- Ring for the shower holder: Z.638.391 (from 11/2017; the previous ring Z.634.116 is no longer available)
- Tap body: CV16/DN15 non-return valve Z.530.534 and M6x0.75 mounting screw Z.600.025.700
- Standard connections: 1/2" x 3/4" L130 K.30.99.34.000.44, with flat washer Z.600.276, rosette Z.606.622.000 and 1/2" mounting set Z.532.649.901 (mounting hole ø22 mm; price per piece: you need 2)
The last two photos show the K.24.42.63 and the current KWC parts drawing for that model; only the intermediate tap spout differs.
Older version?
Does your tap still have the 2011 dishwashing spray (Z.536.530.145) with sealing screw Z.536.525.145 and washer Z.536.527? Then you have an older version. You can find it on this parts page, or switch between the versions at the top.
You can find the KWC installation manual here as a PDF.
Not sure which part you need? Send us a photo, we will find it for you!
