Are you looking for a touchless washbasin tap for a public area where hygiene and low water consumption are important?
The Mora MMIX Tronic WMS opens via a sensor and closes gently with a soft-closing solenoid valve.
With the temperature knob, you set the water temperature. You can then replace the knob with a cover cap, so no one can change the setting.
The tap is made entirely of metal and is therefore resistant to vandalism.
Specifications at a glance
-
Operation: sensor (IP67) with automatic setting
-
Temperature: temperature knob, replaceable with a cover cap
-
Power supply: battery (included), can be converted to mains power with adapter set S600147
-
Water consumption: Eco aerator, constant 5 l/min at 2–6 bar
-
Safety: soft-closing solenoid valve, maximum flushing time to prevent flooding, non-return valves according to EN 1717
-
Hygiene: prepared for thermal disinfection against Legionella
-
Cleaning mode: temporarily switchable off
-
Material: entirely metal, vandal-resistant, lead-free and nickel-free
-
Connection: Soft PEX hoses (stainless steel braided) with integrated non-return valves and filters
-
Tap hole: Ø 33.5–37 mm
Tronic WMS
WMS stands for Water Management System. With a gateway and subscription, or with dongle 729482, you connect the tap wirelessly to the system.
You then program the flushing time (10–60 seconds), the tap measures the temperature of the flowing water and you set a temperature limit: above the set maximum temperature, the tap closes immediately.
You also set hygiene flushes to prevent stagnant water, and a maximum flushing time of 5 minutes prevents flooding.
Components
On the component drawing next to the photos, you can see which individual components we supply for this product, such as the battery, the solenoid valve, the aerator and the remote control. You can order them directly below the product.
Is the component you are looking for not listed? Send us a photo, we will find it for you!
